杭州小飞电器有限公司浅析智能消防巡检柜的用途

 

Brief Analysis on the Application of Intelligent Fire Inspection Cabinet in Hangzhou Xiaofei Electrical Appliances Co., Ltd

 

智能消防巡检柜它主要的用途是用于在一些是酒店商场和建筑小区以及电力工业等等不同领域当中，其使用的环境是在零下10摄氏度和40摄氏度之间，智能消防巡检柜在工作的环境中不能有腐蚀性和油性以及可燃性的气体存在，一定要让智能消防巡检柜保持在一个良好通风环境中使用，注意的就是要避免阳光直射。智能消防巡检柜在运行的时候能够智能控制和有效保障消防泵等一些消防设备，还具有光报警和故障记忆的功能方便工作人员检修，那么下面消防控制柜生产厂家就简单介绍一下智能消防巡检柜的一些优点。

 

Intelligent fire patrol cabinet is mainly used in different fields such as hotel, shopping mall, building district and power industry. Its environment is between minus 10 degrees Celsius and 40 degrees Celsius. There is no corrosive, oily and flammable gas in the working environment of intelligent fire patrol cabinet. We must keep the intelligent fire inspection cabinet in a good ventilated environment, and pay attention to avoid direct sunlight. Intelligent fire control cabinet can control and effectively protect some fire fighting equipment such as fire pump when it is running. It also has the function of light alarm and fault memory to facilitate staff maintenance. Then the following fire control cabinet manufacturer briefly introduces some advantages of intelligent fire control cabinet.

 

智能消防巡检柜

 

Intelligent Fire Inspection Cabinet

 

1、智能消防巡检柜所具备的特点都有功能齐全可以独自完成消防主要回路和液体增压机构的低速无压巡检工作，在发生火灾现象时可以及时启动消防泵同时还拥有过电压电流、短路缺相等保护措施，在消防泵运行出现故障时会自动转工频的方式投入消防工作。

 

1. Intelligent fire inspection cabinet has the characteristics of complete functions, which can complete the low-speed and no-pressure inspection work of main fire circuit and liquid supercharger independently. When fire occurs, fire pump can be started in time, and protection measures such as over-voltage current and short-circuit are also available. When the fire pump fails, it will be able to operate at the same time. The automatic conversion mode is put into fire fighting work.

 

2、它对于失误操作现象还加装了智能化保护装置有效的防止同时出现巡检多台设备情况，能够在巡检过程中发现线路故障时具有声光警报、记录具体位置和储存信息功能，可以通过信号模块快速的传输到总控室的界面上，让工作人员更快精确的找到故障位置进行维修恢复运作。

 

2. Intelligent protection device is also installed to prevent the occurrence of multiple equipment in patrol inspection. It has the functions of sound and light alarm, recording specific location and storing information when line faults are found during patrol inspection. It can be quickly transmitted to the interface of general control room through signal module to let the workers go. The staff can find the fault location more quickly and accurately for maintenance and recovery operation.

 

3、它装有完善的消防接口可以满足不同使用需求，拥有手动和自动两种巡检功能让操作更简单高效，该巡检方式做到了安全性能高、电流功率消耗低以及环保节能等优点。

 

3. It has perfect fire-fighting interface to meet different needs. It has two patrol functions, manual and automatic, which makes the operation more simple and efficient. The patrol mode has the advantages of high safety performance, low current power consumption and environmental protection and energy saving.