集成灶的自动断气功能?当前位置:首页 / 小飞视点 / 媒体关注
集成灶的自动断气功能?
查看:29次 更新时间:2022-04-14 15:13:27

 集成灶自动断气一般是因为进风量不足,缺氧导致熄火。锅不能放的太低或因使用尖底锅,不适应。换平底锅,或者换高一些的锅架。

自动断气熄火原因:
脉冲点火器坏掉需更换脉冲点火器。
熄火感应针没检测到火焰,检测炉盖火孔是否堵塞,用锐器疏通;调节内环风门使火焰能稳定的烧到熄火感应针为止。
熄火感应针线脱落,检查感应线是否脱落,重新装好。
电脑板损坏,如果集成灶经常在同一时间熄火,比如烧了一个菜后再灶就熄火,可以让维修人员检查一下是不是电脑板的问题。
The automatic air cut-off of integrated stove is generally due to insufficient air inlet volume and hypoxia, resulting in flameout. The pot cannot be put too low or is not suitable due to the use of sharp bottom pot. Change the pan, or change the higher pot rack.
 
Reasons for automatic gas cut-off and flameout:
 
If the pulse igniter is broken, replace the pulse igniter.
 
If the flame is not detected by the flameout induction needle, check whether the fire hole of the furnace cover is blocked and dredge it with a sharp tool; Adjust the inner ring damper so that the flame can burn stably until the flameout induction needle.
 
The flameout sensing needle and thread fall off. Check whether the sensing thread falls off and reinstall it.
 
The computer board is damaged. If the integrated stove often turns off at the same time, for example, the stove turns off after burning a dish, you can ask the maintenance personnel to check whether there is a problem with the computer board.
分享到: 0